ORVALDI VR6K, VR10K online 2U LCD

Seria: On-line

With true double-conversion design, VR 6-10K series provides powerful and overall protection to your sensitive devices. It can accept wider input voltage for harsh environment. It's perfect protection for your precious servers and workstations.

Manufacturer: ORVALDI
Product code: VGAR6K, 10K
ORVALDI VR6K, VR10K online 2U LCD

Characteristic:

True double-conversion

  • Microprocessor control optimizes reliability
  • Output power factor 1
  • Input power factor correction
  • Wide input voltage (110V-300V)
  • 50/60Hz Frequency converter mode
  • ECO mode for energy saving
  • Emergency power off (EPO) function
  • Built-in over voltage cut-off protection and surge immunity by MOV for full-time equipment protection
  • High power factor charger up to 1000W capacity with very low ripple current when charging battery
  • Lowe input THDi to reduce power system pollution
  • Adjustable charging current via LCD panel
  • Smart battery charger design to optimize battery performance
  • Generator compatible
  • Optional external SNMP slot

List of applications:

sensitive lab devices

automatics

controll

servers

 

Technical data:

Model ORVALDI 6K (L) RT ORVALDI 10K (L) RT
PHASE 1 phase in/ 1 phase out
CAPACITY 6000 VA/6000 W 10000 VA/10000 W
INPUT
Nominal Voltage 208/220/230/240 VAC
Voltage Range

110-300 VAC @ 0~60% load; 140-300 VAC @ 60~80 % load; 176-300 VAC @ 80~100 % load

Frequency Range 46 ~54 Hz or 56~64 Hz
Phase Single phase with ground
Power Factor ≧ 0.99 @ 100% Load
THDi ≦ 4% @100% load; <6% @ 50% load
OUTPUT
Output Voltage 208*/220/230/240 VAC 208*/220/230/240 VAC
AC Voltage Regulation (Batt. Mode) ± 1%
Frequency Range (Synchronized Range) 46~54 Hz or 56~64 Hz
Frequency Range (Batt. Mode) 50 Hz ± 0.1 Hz or 60Hz ± 0.1 Hz
Current Crest Ratio 3:1 (max.)
Harmonic Distortion ≦1.5% THD (Linear Load), ≦ 7 % THD (Non-linear Load)
Transfer Time AC Mode to Batt. Mode zero
Inverter to Bypass zero
Waveform (Batt. Mode) Pure Sinewave
Overload AC Mode 100%~110%: 10 min; 110%~130%: 1 min; >130%: 1 sec
Battery Mode 100%~110%: 30 sec; 110%~130%: 10 sec; >130%: 1 sec
EFFICIENCY
AC Mode 94% 94%
Battery Mode 91% 91%
BATTERY
Standard Model Battery Type 12V/7 Ah 12V/ 9Ah
Numbers    
Typical Recharge Time 9 hours recover to 90% capacity
Charging Current (Max.) 1.0A
Charging Voltage 218.4 VDC ±1%
Long-run Model Battery Type Depending on applications
Numbers 16-20**
Charging Current (Max.) 4.0A
Charging Voltage (13.65 VDC x battery number) ± 1%
INDICATORS
LCD Panel UPS status, load level, battery level, input/output voltage, discharge timer, and fault conditions
ALARM
Battery Mode Sounding every 4 seconds
Low Battery Sounding every 2 seconds
Overload Sounding twice every second
Fault Continuously sounding
PHYSICAL
Standard Model Dimension, DxWxH (mm) UPS Unit: 600x438x88 [2U]; Battery Pack: 695x438x88[2U] UPS Unit: 600x438x88 [2U]; Battery Pack:695x438x88[2U]
Net Weight (kgs) UPS Unit: 15; Battery Pack: 48 UPS Unit:18; Battery Pack: 48
Long-run Model Dimension, DxWxH (mm) 600x438x88 [2U] 600x438x88[2U]
Net Weight (kgs) 15 18
ENVIRONMENT
Humidity 20-90 % RH @ 0- 40°C (Non-condensing)
Noise Level Less than 55dB@1Meter Less than 58dB@1Meter
MANAGEMENT
Smart RS-232/USB Supports Windows 2000/2003/XP/Vista/2008, Windows 7/8, Linux, and MAC
Optional SNMP Power management from SNMP manager and web browser
 
* Derate capacity to 60% of capacity in CVCF mode and to 90% when the output voltage is adjusted to 208 VAC.
** When using batteries from 16-19, the unit will de-rate according to the formula: P=Prating x N/20
*** If the UPS is installed or used in a place where the altitude is above than 1000m, the output must be derated one percent per 100m.
Product specifications are subject to change without further notice.

 

Contact

ORVALDI Power Protection
orvaldi@orvaldi.com
email: orvaldi@orvaldi.com